How to remove aftermarket radio

How do you remove a double DIN radio without a key?

To remove the radio without radio removal keys involves taking the dash apart until the side of the radio is visible. To remove the restraint brackets you will have to remove the 4 small silver screws that hold them to the radio. These are located on the side of the radio, 2 screws per side.

How do you use a radio key removal?

Simply insert the proper tool and wait for the “notch” feel. Once you feel the notch, apply force away from the radio towards the rear of the vehicle to remove the radio from the dash.

How do you remove a radio from a car?

How to Disconnect the Car Stereo Wiring Harness

  1. Remove the dash plate or console to reveal how the stereo is connected to the vehicle. …
  2. Pull the stereo out of the dash far enough to reveal the wiring connected to the back of the stereo. …
  3. Unplug the wiring harness from the back of the car stereo to remove it from this component.

How do I use the din removal tool?

How to Remove a Car Stereo Unit With DIN Tools

  1. Locate the holes on the front of the stereo. There are two on either side. …
  2. Insert the DIN tools into the holes, one to each side, until you hear or feel a click, or until the tools cannot be pushed further.
  3. Spread the tools apart slightly.

How do I get the code for my Ford radio?

How To Get Your Ford Radio Code?

  1. Press and hold buttons 1 & 6 together.
  2. The radio will go through a series of information on the display, the ONLY information that will be your serial will begin “M” or “V” followed by 6 digits.
You might be interested:  How to start an internet radio station from home

How do you remove an Alpine car stereo without the key?

Look at each side, where on any other stereo you’d insert the removal keys. Using a flat blade screw driver or something similar, slide these pegs down and give the front of the unit a pull towards you. Do the same on the other side and the unit should come free. From there you’ll be able to slide the unit out.

How do you remove an Alpine radio?

How to Uninstall My Alpine Stereo

  1. Open the hood of your car. …
  2. Press the faceplate release button, typically located in the corner of your Alpine stereo. …
  3. Use a flat head screwdriver to carefully pry up the plastic bezel surrounding your stereo. …
  4. Unlock the stereo from the mounting bracket. …
  5. Press the release tab on the plastic wiring harness socket.

Leave a Reply

Your email address will not be published. Required fields are marked *