How to get steering wheel controls to work on chinese radio

What Are Key 1 and Key 2 wires?

KEY1, KEY2 and GND are the control lines for old style Steering Wheel Controls (SWC). The old style SWC are analogue and appear in very old cars. … But, the KEY1 KEY2 analogue has become a standard for manufacturers to use when making connections to an Android Headunit.

How do steering wheel controls work?

A small computer is built into the steering wheel controls switches in vehicles that use data communication for the steering wheel audio controls. … When you press a switch on the steering wheel, the computer sends a digital communication to the computer in the radio.

Will my steering wheel controls work with a aftermarket radio?

This subject is a little complicated, but the basic answer is that, no, you can’t connect steering wheel audio controls to an aftermarket radio without an adapter. … In most cases, though, an adapter is required.

What is the blue power antenna wire for?

One thing to note, most head unit wiring harnesses also have a solid blue wire. This wire is typically for power antenna or factory amplifier turn on, do not get this wire confused with the remote turn on wire with the blue/white stripe.

What is the SWC wire?

SWC Interface Wiring

There are two wires used for steering wheel controls. Each interface (either stand-alone or as part of a multi-function product) has one blue/yellow wire and one black wire with a stereo-type 3.5mm plug. Both wires accomplish the same purpose: transfering the SWC signals to the radio.

What is a B+ wire?

The Red to ACC B+ The B+, which has power at all times, connects to the yellow wire to maintain the memory, and the ACC B+, which has power when the ignition switch is in the Aux and On position, connects to the red so that the radio turns off when the ignition switch is Off.

You might be interested:  How to build radio control cars

How do you check steering wheel controls?

Ω

  1. Disconnect the SWC Interface from the plug. …
  2. Place your positive (red) probe on the first Analog Channel. …
  3. Ground the negative probe to the wire you were instructed to ground in the wiring guide. …
  4. Press and hold the Volume Up button on the steering wheel and look for a response on the meter.

8 мая 2020 г.

What is a steering wheel control?

What Are Steering Wheel Audio Controls? Steering wheel audio controls are designed to make it less dangerous to interact with your car radio when you’re driving. The basic idea is that you can use these controls without taking your hands off the steering wheel or taking your eyes off the road.

Can I add steering wheel controls?

Yes, there are, and they vary greatly between manufacturer’s of the head unit. There are also a few options if you’d like to integrate your OEM steering wheel controls to a new head unit.

Leave a Reply

Your email address will not be published. Required fields are marked *