How to unlock chevy radio 2007

How do I unlock my 2007 GM radio?

Turn on the ignition; it must be completely on and your vehicle running. Press the power button on your radio for several seconds to unlock the system. If this doesn’t work, pull your vehicle’s codes by pressing and holding presets 2 and 3 for 10 seconds. Write down the 3-digit code that displays on the screen.

How do I unlock my GM radio?

Dial 1-800-537-5140 to connect with GM’s toll-free radio hotline. Once you’re connected, you’ll be asked to provide your vehicle’s radio identification number, along with a special dealer access code. You’ll then be rewarded with a 4-digit retrieval code, which will allow you to unlock your radio.

How do I unlock my car radio without the code?

Without the Unlock Code

Call your car manufacturer directly. Your car manufacturer’s phone number is in your owner’s manual. Ask to be connected to the support department. Tell them you need to reactivate you car stereo and you will be asked for proof of ownership.

How do I disable Theftlock?

To disable the Theftlock feature, enter the user or factory back-up code as follows:

  1. Write down the user or factory back-up code.
  2. Turn the ignition to ACCESSORY or RUN.
  3. Turn the radio OFF.
  4. Press the 1 and 4 buttons together. …
  5. Press the Minute button and “000” will appear on the display.

How do you unlock a Delco radio?

How to Unlock a Delco Radio

  1. Obtain the six-digit dealer code. Contact your local GM dealer. …
  2. Turn the ignition key to the “ON” position, without turning the engine over. Hold the preset buttons “2” and “3” for 10 seconds. …
  3. Call the GM assistance hotline at 800-537-5140. Follow the prompts and select the brand of your vehicle.
You might be interested:  How to work sirius satellite radio

How do I reset the code on my car radio?

Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.

How do I unlock my RDS radio?

To unlock radio you will need access to a GM scan tool. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds.

How do I get the code for my car radio?

Call the number and let customer service know you need your stereo code and have the vehicle’s VIN number, as well as the model and serial numbers off the stereo. They will provide you with the code.

What is a car radio code?

A car radio code is a short string of numbers associated with a security feature found in some head units. … In order to get your head unit working again, you’ll have to locate the proper car radio code and input it using a method that is specific to the particular make and model of your stereo.

How do I get my car out of anti theft mode?

Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.

You might be interested:  When was the first us amateur radio license issued?

How do I unlock my Ford 6000cd radio?

After you reach the limit, the radio enters in “Locked” status. To reset it, hold button 6 for ten seconds. It will bring you another three attempts, but take care if you spend it too, the radio is going to be permanently locked with “Locked 13” message.

Leave a Reply

Your email address will not be published. Required fields are marked *