How to hook up system to factory radio

How do you hook up a amp to a factory radio?

Usually, you’ll be installing a 4-channel amplifier with speaker-level inputs. The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.

How do you hook up a amp without a RCA jack?

3 Ways To Hook Up Amp Without RCA Jacks

  1. Connect Speaker Wire To RCA Adapter. This is the first method that we will use to make a connection. …
  2. Install Using High-Level Amp Inputs. It is also known as speaker level input present on the amplifier. …
  3. Hook-Up Amp Using Line Output Converter(LOC)

Can I hook up a subwoofer to my stock car stereo?

If you are adding an amp and sub to a factory premium sound system with it’s own stock subwoofer, you must get your signal for the line output converter from that subwoofer. … Adding an amp and subwoofer to a stock radio can be the easiest way to improve your stereo system in your car, if you do it correctly.

How do you hook up a subwoofer without an amp?

Hooking Up a Subwoofer Without an Amplifier

Start the installation process by removing your speaker from the mounting dock, giving access to its wiring. Mount your subwoofer in your preferred location. Next, reroute the stereo and power supply cables to the subwoofer and connect them.

What is the best line output converter?

Without any further ado, let’s get to it.

  1. AudioControl LC2i PRO 2 Channel Line Out Converter – Best Line Out Converter. …
  2. AudioControl LC7i 6-Channel Line Output Converter – Most Versatile Line Out Converter. …
  3. Kicker KISLOC 2-Channel Line Out Converter – Best Beginner’s Line Out Converter.
You might be interested:  Radio programming

Can you hook an amp up to a factory car stereo?

Because factory radios don’t have dedicated outputs for amplifiers (“RCA” or “preamp outputs”), most outboard power amps come with high-level inputs, which enable you to tap into the factory speaker wires for signal flow.28 мая 2020 г.

How do I connect subwoofer to speaker level output?

Be sure your receiver can run both ‘A’ and ‘B’ speakers simultaneously. 2. For subwoofers equipped with a speaker-level input and a speaker-level output, simply connect the receiver speaker outputs to the speaker-level input on the subwoofer and the speaker-level output of the subwoofer to your speakers.

Do you need a line output converter?

A: Yes, definitely. Amplifiers that offer speaker-level inputs don’t require a separate line output converter to tap into existing speaker wires to get their signal. Many powered subwoofers offer this feature, too. The speaker-to-line level conversion is done inside the amplifier.

Leave a Reply

Your email address will not be published. Required fields are marked *