How to remove audi a4 radio without keys

How do you take out a radio without a key?

How to remove car stereo without tools

  1. Take two knives (or similar flat objects, hard plastic box covers, long screw drivers, etc.).
  2. Slide knives to both sides between metal frame and radio.
  3. Knives open the locks.
  4. Pull both knives outwards while turning the sharp ends of the knives towards each other. Radio comes out a bit.
  5. Pull the knives out.

How do I unlock my Audi a4 radio?

How do I enter the Audi radio code into my specific radio?

  1. Radio is on and appears in “SAFE” mode.
  2. Simultaneously press the P.SCAN and RBDS buttons, holding them down, until “1000” lights up. …
  3. Use the station buttons 1 through 4 to input the radio code. …
  4. Once you have entered the correct code in the display press the P.

How do you remove a double DIN radio without a key?

To remove the radio without radio removal keys involves taking the dash apart until the side of the radio is visible. To remove the restraint brackets you will have to remove the 4 small silver screws that hold them to the radio. These are located on the side of the radio, 2 screws per side.

How do you use a radio key removal?

Simply insert the proper tool and wait for the “notch” feel. Once you feel the notch, apply force away from the radio towards the rear of the vehicle to remove the radio from the dash.

How can I get the code for my Ford Radio for free?

How To Get Your Ford Radio Code?

  1. Press and hold buttons 1 & 6 together.
  2. The radio will go through a series of information on the display, the ONLY information that will be your serial will begin “M” or “V” followed by 6 digits.
You might be interested:  How far is rockefeller center from radio city music hall

How do I use the din removal tool?

How to Remove a Car Stereo Unit With DIN Tools

  1. Locate the holes on the front of the stereo. There are two on either side. …
  2. Insert the DIN tools into the holes, one to each side, until you hear or feel a click, or until the tools cannot be pushed further.
  3. Spread the tools apart slightly.

How do I find my Audi radio code?

The car radio code is indicated on many audi models on a small white sticker inside the glove box. The unlock code will be labeled “Anti-theft radio code”. Enter this code using the preset radio buttons of your audi radio.

How do I get my Audi radio out of safe mode?

Step 1: Turn on radio with left button. Step 2: Hold SCAN and RDS buttons simultaneously. Step 3: Use keys 1,2,3,4 to input code. You will need to press each button more than once.

How do I get my radio out of safe mode?

To UNLOCK the radio, turn it on with ignition in its ON position (engine can be running or not, shouldn’t matter). Now, turn ignition OFF, but leave key in ignition with radio in its ON position (SAFE still displayed on radio). Now, leave everything like this for about an hour or more.

Leave a Reply

Your email address will not be published. Required fields are marked *